Skip to end of metadata
Go to start of metadata

Troubleshooting process for diagnosing issues with the Bosch system.

Step-by-step guide

Checking the Speed Sensor Magnet
  1. Check to make sure there is a magnet (18) attached to a spoke of the rear wheel.
  2. The spoke magnet should be 5 to 17mm away from the speed sensor (18).
  3. The magnet should also pass over the marked line on the sensor.

An improperly adjusted speed sensor magnet can throw an error 503 and put the drive in emergency mode.

There is no content with the specified labels